If ServerHardware wasn't enough for you, here are the hardcore tech details, now that I have them.

  • Intel SRMK2 base system (chassis, main board, platform hardware, etc.)
    • Part numbers
      • Product code SRMK2S
      • TA number A45382-002
      • Main system board P/N A08691-603
    • Measurements
      • Outside dimensions
        • 22.5 inches front-to-back (not incl. front bezel)
        • 16.75 inches wide
        • 1.75 inches thick
      • Edge mounting holes
        • 1 inch apart vertically
        • 21.75 inches apart horizontally
      • Longitudinal mounting holes
        • 6 holes, spaced 3.625 inches apart
        • Centered vertically
        • Not centered horizontally
    • 200 watt power supply
    • ServerWorks core logic
    • BIOS information
      • AMI/Intel BIOS, copyright 2001
      • BIOS version = PT030LEA.86B.0003.P
    • Features
      • 2 x Intel 82559 Ethernet controllers (10/100)
      • ATI Rage XL VGA w/ 4 MB video RAM
      • 2 x 64-bit, 66 MHz, PCI slots
      • Adaptec AIC-7899 SCSI Ultra160 SCSI host adapter
        • 2 channels: Both available internally, only A externally
        • Adaptec SCSI BIOS 2.57S6.1
        • PCI location 01:04
      • Misc I/O ports
        • PS/2 keyboard and mouse ports
        • 2 x USB (USB 1.1) ports
        • 9-pin RS-232 serial port (0x3F8, IRQ4)
  • Processors
    • 2 x 866 MHz Intel Pentium III microprocessors
    • 256 KB ECC L2 cache (each)
    • CPU ID = 68A
  • Main memory
    • 1024 MB
    • 4 x 256 MB modules (all slots filled)
    • Micro P/N MT18LSDT3272G-133E1
    • PC133, 133 MHz, 168-pin, CL3, registered, ECC, 3.3 volt, SDRAM
  • Storage
    • 2 x 73 GB hard disk drives
      • Both drives:
        • are SCA, 80-pin, 320 MB/sec, SCSI
        • are mounted in hot swap carriers
        • appear to be the same Seagate OEM model
        • appears to have been re-badged by IBM in various ways
        • have 143374000 blocks (512 bytes/block)
        • have a total capacity of 73,407,488,000 bytes
        • domain validate as FAST-80 WIDE SCSI 160.0 MB/s DT
      • SCSI ID 0, channel B:
        • Vendor: IBM-ESXS
        • Model: ST373307LC
        • Firmware: B25E
      • SCSI ID 1, channel B:
        • Vendor: IBM-ESXS
        • Model: DTN073C1UCDY10
        • Firmware: S23J
    • Intel ESG-SHV SCA HSBP M14 hot swap backplane
      • SCSI ID 6, channel B
      • Firmware 0.01
    • CD-224E slim IDE CD reader
      • IDE primary master
      • BIOS PIO mode 3, UDMA mode 2
    • 1.44 MB flopy drive, slim
Edit | Attach | Watch | Print version | History: r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions
Topic revision: r3 - 2009-02-22 - BenScott
 

All content is Copyright © 1999-2024 by, and the property of, the contributing authors.
Questions, comments, or concerns? Contact GNHLUG.
All use of this site subject to our Legal Notice (includes Terms of Service).